Composite Applications

Here you’ll find our selection of untreated fiber for composite applications:

LineMat | Short Fiber

LineMat

For High Strength Panel Reinforcement Applications in Layup Construction

LineMat is a structural, unidirectional, aligned hemp fiber mat made from long fiber for reinforcement purposes for lay-up panel manufacturing and fiberglass mat replacements applications*. LineMat is produced from bast hemp fiber; supplied in a form of non-dense (loose) mats (tows) using our unique HempTrain® technology.

LineMat is approximately 40″ (1000 mm) x 12 ” (300 mm) x 1″, with a weight of approximately 1/4 Lb (115 gr) each.

*Hemp fiber is approximately only half the weight of the fiberglass for the same amount of fiber in the mix; therefore, the quantity of our fiber by weight is only 50% of the weight of glass fiber normally used for the given mix.

Short Fiber

For Composites Requiring Fine Dispersible Fiber

Versatile reinforced fiber which can be used in most building and construction applications such as fiberglass replacement* in spray-on applications for composite materials and reinforced plastics. Short Fiber is manufactured from clean, aligned, structural hemp bast fiber, uniformly sized to 3/4″ (20 mm); supplied in bulk.

*Hemp fiber is approximately only half the weight of the fiberglass for the same amount of fiber in the mix; therefore, the quantity of our fiber by weight is only 50% of the weight of glass fiber normally used for the given mix.